Determining And Fixing Plumbing Noises In Your Home

To diagnose noisy plumbing, it is important to determine first whether the unwanted sounds occur on the system’s inlet side-in other words, when water is turned on-or on the drain side. Noises on the inlet side have varied causes: excessive water pressure, worn valve and faucet parts, improperly connected pumps or other appliances, incorrectly placed pipe fasteners, and plumbing runs containing too many tight bends or other restrictions. Noises on the drain side usually stem from poor location or, as with some inlet side noise, a layout containing tight bends.

Hissing

Hissing noise that occurs when a faucet is opened slightly generally signals excessive water pressure. Consult your local water company if you suspect this problem; it will be able to tell you the water pressure in your area and can install a pressurereducing valve on the incoming water supply pipe if necessary.

Thudding

Thudding noise, often accompanied by shuddering pipes, when a faucet or appliance valve is turned off is a condition called water hammer. The noise and vibration are caused by the reverberating wave of pressure in the water, which suddenly has no place to go. Sometimes opening a valve that discharges water quickly into a section of piping containing a restriction, elbow, or tee fitting can produce the same condition.

Water hammer can usually be cured by installing fittings called air chambers or shock absorbers in the plumbing to which the problem valves or faucets are connected. These devices allow the shock wave created by the halted flow of water to dissipate in the air they contain, which (unlike water) is compressible.

Older plumbing systems may have short vertical sections of capped pipe behind walls on faucet runs for the same purpose; these can eventually fill with water, reducing or destroying their effectiveness. The cure is to drain the water system completely by shutting off the main water supply valve and opening all faucets. Then open the main supply valve and close the faucets one at a time, starting with the faucet nearest the valve and ending with the one farthest away. Try calling Silver Fox Plumbing Las Vegas to fix your drains and fixtures.

Chattering or Screeching

Intense chattering or screeching that occurs when a valve or faucet is turned on, and that usually disappears when the fitting is opened fully, signals loose or defective internal parts. The solution is to replace the valve or faucet with a new one.

Pumps and appliances such as washing machines and dishwashers can transfer motor noise to pipes if they are improperly connected. Link such items to plumbing with plastic or rubber hoses-never rigid pipe-to isolate them.

Other Inlet Side Noises

Creaking, squeaking, scratching, snapping, and tapping usually are caused by the expansion or contraction of pipes, generally copper ones supplying hot water. The sounds occur as the pipes slide against loose fasteners or strike nearby house framing. You can often pinpoint the location of the problem if the pipes are exposed; just follow the sound when the pipes are making noise. Most likely you will discover a loose pipe hanger or an area where pipes lie so close to floor joists or other framing pieces that they clatter against them. Attaching foam pipe insulation around the pipes at the point of contact should remedy the problem. Be sure straps and hangers are secure and provide adequate support. Where possible, pipe fasteners should be attached to massive structural elements such as foundation walls instead of to framing; doing so lessens the transmission of vibrations from plumbing to surfaces that can amplify and transfer them. If attaching fasteners to framing is unavoidable, wrap pipes with insulation or other resilient material where they contact fasteners, and sandwich the ends of new fasteners between rubber washers when installing them.

Correcting plumbing runs that suffer from flow-restricting tight or numerous bends is a last resort that should be undertaken only after consulting a skilled plumbing contractor. Unfortunately, this situation is fairly common in older houses that may not have been built with indoor plumbing or that have seen several remodels, especially by amateurs.

Drainpipe Noise

On the drain side of plumbing, the chief goals are to eliminate surfaces that can be struck by falling or rushing water and to insulate pipes to contain unavoidable sounds.

In new construction, bathtubs, shower stalls, toilets, and wallmounted sinks and basins should be set on or against resilient underlayments to reduce the transmission of sound through them. Water-saving toilets and faucets are less noisy than conventional models; install them instead of older types even if codes in your area still permit using older fixtures.

Some drain pipes that do not run vertically to the basement or that branch into horizontal pipe runs supported at floor joists or other framing present particularly troublesome noise problems. Such pipes are large enough to radiate considerable vibration; they also carry significant amounts of water, which makes the situation worse. In new construction, specify cast-iron soil pipes (the large pipes that drain toilets) if you can afford them. Their massiveness contains much of the noise made by water passing through them. Also, avoid routing drainpipes in walls shared with bedrooms and rooms where people gather. Walls containing drainpipes should be soundproofed as was described earlier, using double panels of sound-insulating fiberboard and wallboard. Pipes themselves can be wrapped with special fiberglass insulation made for the purpose; such pipes have an impervious vinyl skin (sometimes containing lead). Results are not always satisfactory.

Silver Fox Air Conditioning, Plumbing & Heating
2636 Westwood Dr
Las Vegas, NV 89109
(702) 472-8777

Save Your Money With Tankless Water Heater

A water heater in the home is what heats the water you take a shower with, what you get hot water from to do your laundry and to do your dishes. If you find that, your water heater is on the frits, not making your water as hot as you like, or if your water heater is not going to meet the needs of your family you should look at the tankless water heater that is available. Some of the best new technology available has brought this new system to the world, so that you can heat water, as you need it without having to wait for it. For more information of water heaters please contact Las Vegas Water Heaters.

A tankless water heater is going to use less energy than other forms of heating water. If you already are heating your water with gas, electric or with coal from your current heating system, you are going to save money. A tankless water heater is going to save you from 10% to 50% of the cost of heating your water when you install and use a tankless water heater in your home.

A tankless water heater is going to heat the water instantly when you use it. The heater is going to run when the water turns on. The tankless water heater is not heating water when you are not using it. If you are doing loads of laundry and you are taking a shower, the tankless water heater can keep up with all the water usage. You can even adjust the tankless water heater to the temperature that you like the water to be at, which is going to save you even more money in the long run.

The tankless water heater is one that will take the place of that big tank in your basement or in the closet of your home. Another advantage, besides saving space, and saving on your hot water costs, is that you will not have trouble with the tankless water heater that some people have when their hot water tanks exploded and soak the home. If you have ever heard stories about a water tank exploded because of age or such, and water runs through the home, this tankless water heater is going to take some of that risk out of your home.

A great advantage to the tankless water heater is that if you are building an addition to your home, and you want to include a new bathroom you can include the tankless water heater inside the wall cavities, saving space, and saving on your water heating bill at the same time.

Bathtub Inserts – How to Install Correctly

Bath tub inserts enable a user to have an easier time while taking a bath. This is especially useful for young children and the very old. It is very handy for disabled persons too. Tub inserts are usually easy to install with just a minimal number of bolts used and does not require any need to modify the tub. Thanks to Las Vegas Plumbing Repair for proving the following plumbing information.

What to look for in a bath tub insert

Choose bath tub inserts that are made from gel coat and is reinforced by fiberglass materials, can be installed by a single person without any fuss and without changing anything on the existing tub, exhibits a non-slip surface which is also soft and pliable for the user’s comfort, and a reasonable warranty which normally lasts from a year up to three years.

Instructions on installing the tub insert

1. First, check the tub insert kit if all the necessary components are present. Look at the tub’s bottom to ascertain that its drain gasket is in place.

2. Cleaned the whole bath tub assembly, including the shower unit with the use of a non-abrasive cleaning agent. After cleaning, make sure that the whole thing is dry before continuing the installation process. This is important since any moisture left may cause damage to the floor.

3. Fit the insert to find it if it fits properly. After testing if the insert fits, remove the insert. Apply silicone caulking to the shower drain’s upper part as well as the tub bottom’s gasket. Make sure that the bead of silicone which encircles the drain brass is at least half an inch.

4. With utmost care, gently place the tub insert on the shower unit by sliding it into place. Apply ample pressure to aid in setting the insert. Fill the tub with water, the water’s weight will help in putting the insert in place while the silicone is setting.

5. When the silicone has cured, it is time to drain the water. After draining, clean the tub and the insert using a mild cleaning agent as well as warm water. It is a strict no-no to use liquid abrasives or even scouring powder. Congratulations, you may now use your new bath tub!

Cleaning and maintenance

Again, it is important to keep in mind that you should not employ abrasive cleaners. This is because abrasive cleaners have the potential to scratch as well as dull the unit’s surface. It is advisable to use liquid detergents like Mr. Clean, Ajax, or Top Job. These cleaning agents that have been mentioned may be used for daily cleaning of the tub. Never use sa metal scraper, steel wool, or wire brushes because these tools can easily damage the whole setup. Periodically, you can scrub any mineral deposits or soap stains using gel gloss or even a dishwashing detergent. Waxing it periodically with a liquid wax can improve the luster and finish of the tub and insert.

If your bath is in any way damaged, you can easily have it repaired. Contact the nearest service center and ask for a professional repairman. If ever the services of a repairman is not available in your area, you can always contact the manufacturer of your bath tub insert as well as that of the tub itself. Repair kits can also be bought from the manufacturers or from do it yourself shops. Repair kits usually include a gel coat.

These are some of the pointers that you must consider when getting a tub insert as well as installing it. Instructions on cleaning and maintaining the whole setup is also included to add years to your bathroom components.

Bathroom Design Tips

Every bathroom needs to be tidy and splendid for which you have to cast the elements of comfort and luxury in your bathrooms. An exquisite bathroom requires the elements of elegance that reflects the tone of your bathrooms and your personality as a person using the bathroom.

Bathroom is a place to drain out all your weariness of being a daylong spilling of energy due to stress and burden of work. To heal your all day long stress needs a royal treatment which can be obtained in an royal bathroom with the tendency of cleanliness, elegance and proper hardware choice to your bathroom.

Hardware choices should be the primary concern when designing a bathroom. Looks of your bathroom cause a palatable and opulent bath according to your preferences and choices. Gloomy and lack of ventilated bathroom can only give a give an unconsummated bath with no satisfaction.

To make your bathrooms more elegant and ornamental you should give emphasize upon few things as follows:

Bathroom lighting:

Bathroom lights give a special costume to your bathroom. Your bathroom should be illuminated by natural daylights along with artificial lights. Lighting gives a complete alteration in terms of looks of the bathrooms.

When diffused day light mingle with artificial lights make the bathroom space more pleasant and loving. You can select a wide range of bathroom lights according to your choices and preferences as below:

Down lights & Shower lights

Spot Lights

Ceiling Lights

Wall Lights

Mirror & Shaving Lights

If you are a busy person with lack of time and you are staying in Birmingham, UK then you can get it from purebathrooms.net.

So these bathroom lights will give your bathrooms a new and elegant looks.

Bathroom heat and ventilation:

A royal bathroom should have optimum ventilation and heat maintenance. By maintaining the proper heat and ventilation you can give a gear of freshness to your bathroom.

Ventilation, how ever is essential to eliminate odor and moisture. Operable windows are helpful for ventilation and heat, but extractor fans are more particular in case of heat and ventilation.

Bathroom mirrors:

Bathroom mirrors are the integrated part of the bathroom decoration. Bathroom mirrors helps to exhibit the bathroom more spacious and designing. Bathroom mirrors give a complete alteration to your bathroom.

One of the most important functions of bathroom mirror is to reflect lights both artificial and natural. Bathroom mirrors increase the shiny quality and trigger the drama of your bathrooms. Mirror also can be used to reflect the favorite objects in the bathroom.